collapse

Search


User Info

 
 
Welcome, Guest. Please login or register.
Did you miss your activation email?

Author Topic: commands  (Read 13101 times)

Offline amsa

  • Cisco Newbie
  • *
  • Posts: 32
  • Reputation: 0
  • Certification: CCNA
commands
« on: October 27, 2013, 01:21:35 PM »
Hi

Please answer me this question.....

what is it command ? Which we doing on the switch to give me any user enters & applies the command, such as shutdown any interfaces, and the results we see on the Cisco ISE.

Thanks

Offline adecisco

  • Cisco Newbie
  • *
  • Posts: 96
  • Reputation: 10
  • Discovering new solution is sweet!
    • http://adeolaade.blogspot.com/
  • Certification: N/A
Re: commands
« Reply #1 on: October 28, 2013, 08:08:24 AM »
If I may get you correctly you want to log all command that you type on your switch console.

Well is like this:

archive
log config
  logging enable
  logging size 200
  notify syslog contenttype plaintext
  hidekeys
 
 logging trap
logging ISE IP udp/20514

Hope this help else let's know what the issues are.

Thanks.
 
« Last Edit: October 28, 2013, 08:10:33 AM by adecisco »
Technology makes life easy but I hope the same technology will not send man back to stone age!

Offline amsa

  • Cisco Newbie
  • *
  • Posts: 32
  • Reputation: 0
  • Certification: CCNA
Re: commands
« Reply #2 on: October 28, 2013, 01:14:34 PM »
Thanks

Offline MC

  • Global Moderator
  • Cisco Guru
  • *****
  • Posts: 401
  • Reputation: 606
  • CCIE x3 (RS,Sec,SP)
  • Certification: CCIE
Re: commands
« Reply #3 on: October 29, 2013, 12:35:47 AM »
You are not allowed to view links. Register or Login
If I may get you correctly you want to log all command that you type on your switch console.

Well is like this:

archive
log config
  logging enable
  logging size 200
  notify syslog contenttype plaintext
  hidekeys
 
 logging trap
logging ISE IP udp/20514

Hope this help else let's know what the issues are.

Thanks.
Can you really pull syslog messages on ISE? I don't think I have done that before. I would think you would want to point to your normal syslog server. It's too bad ISE still does not support TACACS so we can do command accounting. 

Offline adecisco

  • Cisco Newbie
  • *
  • Posts: 96
  • Reputation: 10
  • Discovering new solution is sweet!
    • http://adeolaade.blogspot.com/
  • Certification: N/A
Re: commands
« Reply #4 on: October 29, 2013, 03:22:59 AM »
My understanding of the question is logging command on ISE, and since ISE logging support syslog on udp port 20514 viewing the logs should not be an issues. Except there is more to what the question is asking..
Technology makes life easy but I hope the same technology will not send man back to stone age!

 

SimplePortal 2.3.7 © 2008-2024, SimplePortal