Author Topic: Lab minutes ISE 2.2 videos (Read 26841 times)

vnagula · « **on:** July 25, 2017, 01:31:12 PM »

Hi friends,

I am planning to purchase the lab minutes ISE2.2 videos. But, i do have few queries regarding the videos.

I am configuring Cisco ISE as a radius and Tacacs+ server for the company i work for.
these are the requirements.

1. end-point authentication using TACACS ( they want to use MSCHAP and TACACS for everything for some compliance thing.. which am not sure why)
2. Remote vpn configuration, authentication using TACACS+ ( both for Windows and MAC - need to use MSCHAP)
3. Wireless setups as well authenticating with TACACS

so, i want to know if there is any information on the videos that would help me with the TACACS configurations.

Also want your suggestions for the issues i mentioned.

1. Can MAC iOS use MSCHAP
2. can endpoints be authenticated with TACACS ( dot1x authentication)

Thanks a lot for the support. I am struggling with these issues for about a month now

MC · « **Reply #1 on:** July 31, 2017, 09:53:07 PM »

I can't see why you would not be able to use TACACS for wired/wireless/VPN although it is not common so I have never tested them. Most people would be ok with RADIUS. But if your compliance calls for TACACS, I suggest you test them in a lab. Most config should be similar to RADIUS with differences being using TACACS server instead of RADIUS on network device config and use TACACS policy-set on ISE. MAC OSX should support PEAP with MSCHAPv2 for .1x but not VPN. Lab Minutes only have video on TACACS for device admin as part of ISE 2.0 video series. I don't recall seeing any Cisco doc on using TACACS with .1x neither. Good luck and let us know how it goes.

Search

User Info

Author Topic: Lab minutes ISE 2.2 videos (Read 26841 times)

vnagula

Lab minutes ISE 2.2 videos

MC

Re: Lab minutes ISE 2.2 videos

Related Topics