Lab Minutes Forum

Technical Discussion => Security => Topic started by: pemasiri on May 25, 2015, 11:18:13 PM

Title: ISE 1.4 with SCCM support
Post by: pemasiri on May 25, 2015, 11:18:13 PM

Hi,
I upgraded ISE 1.3 (with patch 2) to ISE 1.4 in order to support SCCM, however I am not getting option to select vendor as Microsoft as per the attachment. I did the posture update from “Administration/settings/Posture/Updates” but still not showing any vendor name under Vendor drop down boc. Not sure what could be the issue.?, or is there any patch to use. As per my knowledge only one upgrade file is available for both physical appliance and VMs that is “ise-upgradebundle-1.4.0.253.x86_64.gz”.

However I found that someone has upgraded and its getting the option to select vendor as “Microsoft Corp”.

Title: Re: ISE 1.4 with SCCM support
Post by: MC on May 30, 2015, 06:27:34 AM

We just upgraded and are seeing the same thing, no vendor. May be Cisco still need to push that out. Might need a TAC case on this one.

Title: Re: ISE 1.4 with SCCM support
Post by: pemasiri on May 30, 2015, 02:13:17 PM

Hi MC,

I was able to see one of the successful upgrade (attached) which gives option to select Vendors. I got to know that the posture update url needs to be modified but not sure what is the exact url.

Title: Re: ISE 1.4 with SCCM support
Post by: MC on May 31, 2015, 10:24:52 AM

You are not allowed to view links. Register or Login

Hi MC,

I was able to see one of the successful upgrade (attached) which gives option to select Vendors. I got to know that the posture update url needs to be modified but not sure what is the exact url.

Interesting. So you see it in one of your deployments and you did not need to do anything different? What is the URL you have under the Posture update section?

Title: Re: ISE 1.4 with SCCM support
Post by: pemasiri on May 31, 2015, 01:01:50 PM

Hi MC,

Thanks for your response, at last it worked today. I did not do anything other than updating the posture (Administration/settings/Posture/Updates). I guess Cisco has done something internally and it was the same url for update. I would suggest you to give a try and it should work now.

thanks.

Title: Re: ISE 1.4 with SCCM support
Post by: MC on June 05, 2015, 08:51:05 PM

You are not allowed to view links. Register or Login

Hi MC,

Thanks for your response, at last it worked today. I did not do anything other than updating the posture (Administration/settings/Posture/Updates). I guess Cisco has done something internally and it was the same url for update. I would suggest you to give a try and it should work now.

thanks.

Hi, You are right. I can see the list of vendors as well after an update.  :)

Title: Re: ISE 1.4 with SCCM support
Post by: pemasiri on June 06, 2015, 02:46:29 AM

Hi MC,

Hope we can now expect some excellent vedio from you how SCCM will use for Microsoft posture verification and remediation..  :)

we always really appreciate your time and effort on them and truly amazing. !!