Author Topic: ISE Radius Not Responding to ASA (Read 17374 times)

cisco · « **on:** August 22, 2013, 10:15:00 AM »

Has anyone run into this issue?

The ASA is pointing to ISE for Radius (for AnyConnect users).

It was working but stopped. When I pulled the logs, saw the following Radius error.

11007 Could not locate Network Device or AAA Client

Turns out the ASA is sending the request via its inside IP, but putting it's outside public IP in the Call-Station-ID attribute.

Any ideas? I'm digging through ASA on how to set that.

MC · « **Reply #1 on:** August 23, 2013, 12:14:42 AM »

Hmm.. ISE shouldn't use Call-Station-ID to match the Network Device though. It should use the RADIUS Request source IP so as long as you configure the ASA to source RADIUS from a correct interface, that should be fine.

adecisco · « **Reply #2 on:** October 29, 2013, 12:26:35 AM »

Hello Administrator/MC,

I think it time to start filtering some post as some guys just think they can occupy space for no reason. Restriction and rules should be in place to keep the sanity of this forum.

Thanks.

MC · « **Reply #3 on:** October 29, 2013, 12:29:44 AM »

Yes.. It seems we have been getting a lot of spams lately. Will see what we can do. Thanks for this.

Search

User Info

Author Topic: ISE Radius Not Responding to ASA (Read 17374 times)

cisco

ISE Radius Not Responding to ASA

MC

Re: ISE Radius Not Responding to ASA

adecisco

Re: ISE Radius Not Responding to ASA

MC

Re: ISE Radius Not Responding to ASA

Related Topics