Author Topic: ISE: per user static ip address (Read 153471 times)

alx · « **on:** February 14, 2014, 06:02:30 am »

Hi Forum,

I want to migrate from ACS to ISE but figured out that there are no per-user attributes like Framed-IP-Address on ISE. I know this is possible through Authorization but this is a bit uncomfortable...

Any ideas?

BR
alx

MC · « **Reply #1 on:** February 14, 2014, 07:31:36 am »

Hi Welcome to the forum, You can create a custom user attribute type IP and use that to assign an IP to each user. Here is the video.

You are not allowed to view links. Register or Login

alx · « **Reply #2 on:** February 14, 2014, 07:41:25 am »

Hi MC, thanks for your reply, but this is for ACS and not ISE ;-)

MC · « **Reply #3 on:** February 14, 2014, 08:30:11 am »

My bad. It's early morning on Valentine's day. :-) The idea is the same on ISE though.

1. Go to Identity Management > Settings to create a user custom attribute
2. Under the Authorization profile, Advanced Attribute Settings, you can select the attribute you created for RADIUS Framed-IP-Address.

alx · « **Reply #4 on:** February 14, 2014, 10:45:16 am »

You are not allowed to view links. Register or Login

My bad. It's early morning on Valentine's day. :-)

No Problem...

Okay thats what I meant with "is possible through Authorization" and I have to configure a AuthZ Policy for each user with configured static ip address like:

if username=alx then alx_static_ip_profile
if username=blx then blx_static_ip_profile
if username=clx then clx_static_ip_profile
...

With ACS4 you can configure the framed-ip value right in the user profile which would be processed after each successful login.
As I see with ACS 5 you were able to define the custom attributes (5:15 in the mentioned Video) and you were able to define attributes with ISE aswell, but not with type=ip address :-(

MC · « **Reply #5 on:** February 14, 2014, 01:06:06 pm »

I don't think you need per-user auth policy. Try to create a custom attribute type string, configure the IP for each local user, and then come up with an authorization profile that assign at custom attribute to the RADIUS Framed-IP-Address.

alx · « **Reply #6 on:** February 14, 2014, 01:31:09 pm »

I'll give it a try and keep you informed. But not today (UTC+1 Timezone ;-) )

alx · « **Reply #7 on:** February 20, 2014, 07:32:12 am »

Unfortunately Fail... after assigning the per-user attribute the ISE says:

Unable to create Authorization Profile(VPNFixedIP) : Datatypes are mismatching for Radius:Framed-IP-Address(IPV4) and InternalUser:VPN_FixedIP(STRING)

And there is no Datatype IPV4 in user custom attributes.

MC · « **Reply #8 on:** February 20, 2014, 04:52:21 pm »

That' too bad. Have you tried any other data type and see if it potentially works? If not, I hope Cisco will add that at some point.

moritezaa · « **Reply #9 on:** August 20, 2018, 06:17:03 am »

Hi everyone
how we can force client to use your assigned ip address on ISE 2.2?

MC · « **Reply #10 on:** September 04, 2018, 08:20:52 pm »

You can use Frame-IP-Address RADIUS attribute to assign IP to user. That can be statically assigned or fetched from another database like AD.

Search

User Info

Author Topic: ISE: per user static ip address (Read 153471 times)

alx

ISE: per user static ip address

MC

Re: ISE: per user static ip address

alx

Re: ISE: per user static ip address

MC

Re: ISE: per user static ip address

alx

Re: ISE: per user static ip address

MC

Re: ISE: per user static ip address

alx

Re: ISE: per user static ip address

alx

Re: ISE: per user static ip address

MC

Re: ISE: per user static ip address

moritezaa

Re: ISE: per user static ip address

MC

Re: ISE: per user static ip address

Related Topics