Lab Minutes Forum

Technical Discussion => Routing and Switching => Topic started by: Administrator on November 08, 2016, 05:30:29 PM

Title: STACKWISE 480 FOR 3850 SWITCHES (On behalf of Syed)
Post by: Administrator on November 08, 2016, 05:30:29 PM

i need to know how to add a new stack member in switch stack of 3850 switches please help.

Title: Re: STACKWISE 480 FOR 3850 SWITCHES (On behalf of Syed)
Post by: Administrator on November 08, 2016, 05:33:27 PM

Assuming the member switch did not exist, you can connect the stacking cable per link below. Make sure the new switch has no config and powered down. Power on switch only after the stack connection is in place.

http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3850/hardware/installation/guide/b_c3850_hig/b_c3850_hig_chapter_010.html#concept_731340C54C5C4974B300779F6D2728B6