collapse

Search


User Info

 
 
Welcome, Guest. Please login or register.
Did you miss your activation email?

Author Topic: Device Tracking Issue on Catalyst Switches 15.2(1)E  (Read 31128 times)

Offline MC

  • Global Moderator
  • Cisco Guru
  • *****
  • Posts: 400
  • Reputation: 606
  • CCIE x3 (RS,Sec,SP)
  • Certification: CCIE
Device Tracking Issue on Catalyst Switches 15.2(1)E
« on: November 20, 2013, 10:00:54 AM »
I ran into issue where a switch complains about seeing duplicate source IP 0.0.0.0 in ARP probe packet.

2013 Nov 19 16:18:09.498218 arp: Src 0023.445f.dfgc/0.0.0.0 Dst 002a.23rf.fd2d/192.168.0.1

It turns out this is the behavior of Device tracking feature which gets enabled by default when upgrading to 15.2(1)E on most Catalyst switches (2960,3850,4500,4900 etc.). But if you try to disable device tracking, you get

Switch(config)#no ip device tracking       
% IP device tracking is disabled at the interface level by removing the relevant configs


This seems to be a known issue (bug) and the current workarounds are the followings. Depending on the switch model, hopefully one of the options should work for you.

On switch interface,
Option 1:  enter "ip device tracking probe delay 10"
Option 2:  enter "ip device tracking max 0"
Option 3:  enter "nmsp attach suppress"


Offline adecisco

  • Cisco Newbie
  • *
  • Posts: 96
  • Reputation: 10
  • Discovering new solution is sweet!
    • http://adeolaade.blogspot.com/
  • Certification: N/A
Re: Device Tracking Issue on Catalyst Switches 15.2(1)E
« Reply #1 on: November 20, 2013, 10:20:31 AM »
Thanks for this useful information. I think it save lots of headaches during my ISE deployment if a switch came up with strange behavior.

Thank u MC.
Technology makes life easy but I hope the same technology will not send man back to stone age!

Offline MC

  • Global Moderator
  • Cisco Guru
  • *****
  • Posts: 400
  • Reputation: 606
  • CCIE x3 (RS,Sec,SP)
  • Certification: CCIE
Re: Device Tracking Issue on Catalyst Switches 15.2(1)E
« Reply #2 on: November 20, 2013, 10:23:55 AM »
Device tracking is actually needed on switch that is used for wired 802.1X with ISE so there is no need to disable the feature.

 

Related Topics

  Subject / Started by Replies Last post
2 Replies
17400 Views
Last post April 30, 2014, 09:21:48 PM
by bhatsy
1 Replies
50788 Views
Last post November 19, 2014, 07:18:45 PM
by dong
3 Replies
24671 Views
Last post January 26, 2016, 09:26:54 PM
by MC
1 Replies
26176 Views
Last post November 08, 2016, 05:33:27 PM
by Administrator
1 Replies
43264 Views
Last post March 31, 2021, 11:04:00 PM
by Administrator

SimplePortal 2.3.7 © 2008-2024, SimplePortal