Absolutely, AnyConnect NAM allows two different type of credential for user and machine. You just need to configure it accordingly with the profile editor.

I think that this question is very good.

Hi,
I have recreated the topology of the the FlexVPN series in my own lab (another great video series BTW!)
So far, everything has worked exactly as per the videos, but I have now hit a roadblock:
In SEC0257 (DVTI Part 2) I have configured R1 to assign Tunnel IP addresses from a local pool.
The Branch Routers get the negotiated IP address correctly, and both Tunnels (to BR1 and BR2) come up OK.
However, R1 does not get the auto-generated static routes to the Tunnel endpoints via the Virtual-Access interfaces.
This means I don't have reachability across the tunnels and am unable to set up BGP routing.

I am using IOL 15.4(2)T4 images on EVE-NG for my Routers, but swapped R1 to CSR1000V (IOS XE 03.17.00.S / 15.6(1)S ) to see if it would help (it didn't).

Any ideas?


R1#show ip route static
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2
       i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
       ia - IS-IS inter area, * - candidate default, U - per-user static route
       o - ODR, P - periodic downloaded static route, H - NHRP, l - LISP
       a - application route
       + - replicated route, % - next hop override, p - overrides from PfR

Gateway of last resort is 1.1.1.1 to network 0.0.0.0

S*    0.0.0.0/0 [1/0] via 1.1.1.1
      172.16.0.0/16 is variably subnetted, 6 subnets, 4 masks
S        172.16.0.0/16 [1/0] via 172.16.1.1

R1#show ip int brief
Interface              IP-Address      OK? Method Status                Protocol
GigabitEthernet1       1.1.1.11        YES NVRAM  up                    up     
GigabitEthernet2       172.16.1.2      YES NVRAM  up                    up     
GigabitEthernet3       unassigned      YES NVRAM  administratively down down   
GigabitEthernet4       unassigned      YES NVRAM  administratively down down   
Loopback0              172.16.0.2      YES NVRAM  up                    up     
Loopback1              172.16.255.1    YES NVRAM  up                    up     
Virtual-Access1        172.16.255.1    YES unset  up                    up     
Virtual-Access2        172.16.255.1    YES unset  up                    up     
Virtual-Template1      172.16.255.1    YES unset  up                    down   


BR1#show ip int brief
Interface                  IP-Address      OK? Method Status                Protocol
Ethernet0/0                2.2.2.2         YES NVRAM  up                    up     
Ethernet0/1                172.17.1.1      YES NVRAM  up                    up     
Ethernet0/2                unassigned      YES NVRAM  administratively down down   
Ethernet0/3                unassigned      YES NVRAM  administratively down down   
Loopback0                  172.17.0.1      YES NVRAM  up                    up     
Tunnel1                    172.16.255.61   YES NVRAM  up                    up   

Thanks MC for reverting.

No, the user PC is configured with our internal DNS servers.

One of my user need my help in getting access to URL hosted in AWS from this PC and i provided the access in Cisco ASA (FQDN access)...but he is facing Intermittent connectivity issue and after some troubleshooting we came to the conclusion that the URL is getting resolved to multiple IP's (TTL value is 30 Sec) and at the same moment ASA is unable to resolve the current IP's and hence connection is still pointed towards old IP.

I believe this is some thing related to ASA DNS cache time value.

Did anyone here faced the same issue??