collapse

Search


User Info

 
 
Welcome, Guest. Please login or register.
Did you miss your activation email?

Author Topic: vWLC not pushing all WLANs to AP  (Read 6333 times)

deploy

  • Guest
vWLC not pushing all WLANs to AP
« on: March 13, 2017, 03:59:18 AM »
Hi all,

I configured the vWLC with version 8.0 and connected an CAP2702 to it.
The dataport is dot1q trunked. The managemnt port is also being used for data-wlan which is in native vlan.
I am although not able to push guest-wlan to the ap. This wlan is configured on the vWLC as well as it's interface in proper VLAN.
I can ping that VLAN from controller's CLI (serial connection) but I'm unable to ping it from the controller's GUI (which is native management vlan).
Somehow the ap is not able to get that info from the controller being that geust-wlan is a non-routed vlan. I tried running the ap on an access as well on a trunk port but no luck.


Offline MC

  • Global Moderator
  • Cisco Guru
  • *****
  • Posts: 398
  • Reputation: 606
  • CCIE x3 (RS,Sec,SP)
  • Certification: CCIE
Re: vWLC not pushing all WLANs to AP
« Reply #1 on: March 13, 2017, 10:11:01 PM »
If you can ping SVI from WLC CLI, there should be no reason why you cannot ping from the WLC GUI. AP should be on access port unless you run FlexConnect. Can you please confirm if:
1. AP can ping WLC MGMT interface
2. AP registered to WLC
3. You can see SSID broadcasted by the AP.

 

Related Topics

  Subject / Started by Replies Last post
10 Replies
17527 Views
Last post November 10, 2013, 05:57:10 PM
by MC
3 Replies
10837 Views
Last post January 26, 2016, 09:26:54 PM
by MC

SimplePortal 2.3.7 © 2008-2024, SimplePortal