collapse

Search


User Info

 
 
Welcome, Guest. Please login or register.
Did you miss your activation email?

Author Topic: help with soucefire POC  (Read 5589 times)

Offline ozone007

  • Cisco Newbie
  • *
  • Posts: 8
  • Reputation: 0
  • Certification: CCNA
help with soucefire POC
« on: January 04, 2016, 01:50:18 AM »
Hello guys i am doing sourcefire POC can anyone please guide me on the following

I have 5585 with source fire hardware module

Below is the topology after putting ASA 5585 {as of now there is no asa In between}

Plz check attachment



Core-1:
interface GigabitEthernet1/3
description  Link to s-rl-ns-dat-1
ip address 10.200.0.1 255.255.255.252
ip flow egress
ip policy route-map NK_CO_INET
ip ospf network point-to-point
end

CORE-2:
interface GigabitEthernet1/5
description  Link to s-rl-ns-dat-2
ip address 10.200.0.69 255.255.255.252
ip policy route-map NK_CO_INET
ip ospf network point-to-point
wrr-queue cos-map 2 2 3 6 7
 wrr-queue cos-map 3 1 4
 snmp ifindex persist
end

DAT-1:
interface GigabitEthernet1/1/7
description * Link to s-rl-ns-cor-1
no switchport
ip address 10.200.0.2 255.255.255.252
ip ospf network point-to-point
ip ospf cost 5
mls qos trust dscp
end

DAT-2:
interface GigabitEthernet2/1/7
description * Link to s-rl-ns-cor-2
no switchport
ip address 10.200.0.70 255.255.255.252
ip policy route-map NK_CO_INET
ip ospf network point-to-point
mls qos trust dscp
end

Please provide your  suggestion how can we put ASA in transparent mode as shown in image .

Offline MC

  • Global Moderator
  • Cisco Guru
  • *****
  • Posts: 398
  • Reputation: 606
  • CCIE x3 (RS,Sec,SP)
  • Certification: CCIE
Re: help with soucefire POC
« Reply #1 on: January 05, 2016, 10:30:51 PM »
First of all, you will probably need two security contexts, one for each uplink. Each context will be mapped to a unique pair of physical interfaces with traffic being bridged between the interfaces. Yo will need to change from /30 to /29 as each context will need on mgmt IP. You can then just redirect traffic to FP with policy map.

Offline ozone007

  • Cisco Newbie
  • *
  • Posts: 8
  • Reputation: 0
  • Certification: CCNA
Re: help with soucefire POC
« Reply #2 on: January 06, 2016, 11:43:06 AM »
yes that i can understand about redirecting and sourcefire stuff but Client is not ready to change subnet in that case how can we achieve this ?

Offline MC

  • Global Moderator
  • Cisco Guru
  • *****
  • Posts: 398
  • Reputation: 606
  • CCIE x3 (RS,Sec,SP)
  • Certification: CCIE
Re: help with soucefire POC
« Reply #3 on: January 09, 2016, 09:47:57 PM »
You can try not assigning IP to each production context (can't see why it would not be possible but please confirm) and use the third context exclusively for management.

 

SimplePortal 2.3.7 © 2008-2024, SimplePortal