collapse

Search


User Info

 
 
Welcome, Guest. Please login or register.
Did you miss your activation email?

Author Topic: Cisco ISE 1.4 BYOD Wired onboarding problem  (Read 9261 times)

Offline rezafathi

  • Cisco Newbie
  • *
  • Posts: 5
  • Reputation: 0
  • Certification: CCNA
Cisco ISE 1.4 BYOD Wired onboarding problem
« on: June 14, 2015, 11:34:30 AM »
Hello,
I watched the respective video about wired BYOD onboarding from your website and did all the steps right. Non-domain computer redirects to ISE guest portal and I enter the domain username and password then it downloads cisco network assistant and does setuo the network successfully but it does not go to the next authorization policy which is permit internet access and loops back to the login page again and again. please help me because it's driving me crazy.

Offline MC

  • Global Moderator
  • Cisco Guru
  • *****
  • Posts: 398
  • Reputation: 606
  • CCIE x3 (RS,Sec,SP)
  • Certification: CCIE
Re: Cisco ISE 1.4 BYOD Wired onboarding problem
« Reply #1 on: June 16, 2015, 09:19:30 PM »
Here are the questions
1. Does Network Setup Assistant run to completion? If so,
2. Did the computer get a user certificate installed? If so,
3. Did you see EAP-TLS auth attempt on the ISE log. If so, can you share the screenshot of the auth detail page and your authorization policies.

Offline rezafathi

  • Cisco Newbie
  • *
  • Posts: 5
  • Reputation: 0
  • Certification: CCNA
Re: Cisco ISE 1.4 BYOD Wired onboarding problem
« Reply #2 on: June 17, 2015, 02:32:00 AM »
Hello,
Thank you for your response.

1- yes it runs successfully
2- yes computer gets the certificate for the user
3- As you can see in the attached screen shot, the authentication is PAP/ASCI

I also attached my switch configuration (port gig 1/0/20 is connected to the client) and authorization policy. The DACLs are same as yours in videos. Clients login and the network setup assistant completes but the authorization policy won't change and there is no internet access for user. Please help me because I have worked on it 15 hours a day but I wasn't succesfull/ 

Offline MC

  • Global Moderator
  • Cisco Guru
  • *****
  • Posts: 398
  • Reputation: 606
  • CCIE x3 (RS,Sec,SP)
  • Certification: CCIE
Re: Cisco ISE 1.4 BYOD Wired onboarding problem
« Reply #3 on: June 19, 2015, 10:01:35 PM »
The screenshot looks like a successful login to guest portal before the onboarding begin and not after. Make sure that you have configured correct Client Provisioning profile for wired with 802.1X with corresponding Client Provisioning Policy. Confirm that your client have received correct wired profile by checking the LAN adapter settings. You should see 802.1X box checked with Smartcard/certificate for authentication.

 

Related Topics

  Subject / Started by Replies Last post
1 Replies
9488 Views
Last post March 17, 2014, 09:55:04 PM
by MC
1 Replies
8498 Views
Last post May 21, 2014, 07:53:57 AM
by MC
3 Replies
6443 Views
Last post May 11, 2015, 07:38:07 PM
by MC
0 Replies
7837 Views
Last post January 31, 2018, 02:16:19 PM
by tomimma
1 Replies
11612 Views
Last post December 15, 2020, 02:06:56 AM
by JarvisDashiell

SimplePortal 2.3.7 © 2008-2024, SimplePortal