Lab Minutes Forum

Technical Discussion => Routing and Switching => Topic started by: amsa on February 07, 2017, 05:54:51 PM

Title: Cisco 3750 !!! WARNING: The switch is not usable !!!
Post by: amsa on February 07, 2017, 05:54:51 PM
Hello

can anybody please advice me what is the problem with my 3750 PoE switch with 48 port

Base ethernet MAC Address: 00:25:b4:58:83:00
Xmodem file system is available.
The password-recovery mechanism is enabled.
Initializing Flash...
flashfs[0]: 5 files, 2 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 15998976
flashfs[0]: Bytes used: 13848576
flashfs[0]: Bytes available: 2150400
flashfs[0]: flashfs fsck took 9 seconds.
...done Initializing Flash.
Boot Sector Filesystem (bs) installed, fsid: 3
done.
Loading "flash:/c3750-advipservicesk9-mz.122-25.SEE.bin"...@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
File "flash:/c3750-advipservicesk9-mz.122-25.SEE.bin" uncompressed and installed
, entry point: 0x3000
executing...

              Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

           cisco Systems, Inc.
           170 West Tasman Drive
           San Jose, California 95134-1706



Cisco IOS Software, C3750 Software (C3750-ADVIPSERVICESK9-M), Version 12.2(25)SE
E, RELEASE SOFTWARE (fc2)
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Fri 03-Feb-06 07:59 by antonino
Image text-base: 0x00003000, data-base: 0x0123D8D4

Initializing flashfs...

flashfs[1]: 5 files, 2 directories
flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 15998976
flashfs[1]: Bytes used: 13848576
flashfs[1]: Bytes available: 2150400
flashfs[1]: flashfs fsck took 1 seconds.
flashfs[1]: Initialization complete....done Initializing flashfs.
Checking for Bootloader upgrade.. not needed


POST: CPU MIC register Tests : Begin
POST: CPU MIC register Tests : End, Status Passed

POST: PortASIC Memory Tests : Begin
POST: PortASIC Memory Tests : End, Status Passed

POST: CPU MIC PortASIC interface Loopback Tests : Begin
POST: CPU MIC PortASIC interface Loopback Tests : End, Status Passed

POST: PortASIC RingLoopback Tests : Begin
POST: PortASIC RingLoopback Tests : End, Status Passed

POST: Inline Power Controller Tests : Begin
POST: Inline Power Controller Tests : End, Status Passed

Waiting for Stack Master Election (around 30 seconds)...
POST: PortASIC CAM Subsystem Tests : Begin
TCAM (asic:1, bit: 49) data bus test failed
  Write: 00_00000000_00000000-00_00020000_00000000
  Read:  00_00000000_00000000-00_00000000_00000000
HTD POST: Data Bus Test Failed
POST: POST Failed
POST: PortASIC CAM Subsystem Tests : End, Status Failed

POST: CAM test failed
POST Failed: disabling stack links and shutting down SDP

driver class subsystem initialization failed


This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

cisco WS-C3750-48P (PowerPC405) processor (revision N0) with 118784K/12280K byte
s of memory.
Processor board ID FDO1320Z14E
Last reset from power-on
The password-recovery mechanism is enabled.

512K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address       : 00:25:B4:58:83:00
Motherboard assembly number     : 73-9675-14
Power supply part number        : 341-0029-05
Motherboard serial number       : FDO13200AN7
Power supply serial number      : DTN131741SD
Model revision number           : N0
Motherboard revision number     : A0
Model number                    : WS-C3750-48PS-S
System serial number            : FDO1320Z14E
SFP Module assembly part number : 73-7757-03
SFP Module revision Number      : A0
SFP Module serial number        : FDO13200DJV
Top Assembly Part Number        : 800-25858-05
Top Assembly Revision Number    : A0
Version ID                      : V07
CLEI Code Number                : COMD600BRA
Hardware Board Revision Number  : 0x01


!!! WARNING: The switch is not usable !!!
Unable to create l2trace server process, socket_open() failed

*********************************************************************

From what is it getting in mistake?

what defect is it in it?


what's the reason of this kind of defect?

Please help me,

Regards
Title: Re: Cisco 3750 !!! WARNING: The switch is not usable !!!
Post by: MC on February 12, 2017, 09:04:02 PM
Whenever a device fails POST, it's usually hardware related issue. If you have Smartnet, it should be RMA. If not, I am afraid there is not much you can do.
Title: Re: Cisco 3750 !!! WARNING: The switch is not usable !!!
Post by: amsa on February 14, 2017, 11:31:03 AM
I don't have Smartnet   :( :( :(

thanks MC
Title: Re: Cisco 3750 !!! WARNING: The switch is not usable !!!
Post by: pinyowit on June 24, 2018, 07:46:41 PM

Thank you for this answer.
SimplePortal 2.3.7 © 2008-2024, SimplePortal