71
General Discussion / Re: Can't find lab docs...
« Last post by Administrator on July 16, 2018, 06:09:41 PM »Hi.. All lab diagrams are posted on corresponding video page. You will need to login to see them.
|
71
General Discussion / Re: Can't find lab docs...« Last post by Administrator on July 16, 2018, 06:09:41 PM »Hi.. All lab diagrams are posted on corresponding video page. You will need to login to see them.
72
General Discussion / Can't find lab docs...« Last post by diology on July 15, 2018, 05:35:39 PM »Hi admin,
I can't seem to find any of the lab documents which are discussed in the videos that mentioned we could easily download on the video website. Can you help? Derrick 73
Other / Re: Stopping unneeded PNP / APIC-EM Services on Prime Infra 3.4« Last post by dpsharma on July 08, 2018, 11:54:13 AM »While I don't see any new alarms, but I was thinking that it is possible that the default system jobs were failing as many of them are running at the same time. And I found that the web login is slow, so I came across this thread. I dont seen to have any such issues, as it is a Cisco UCS220M appliance and under System Monitoring dashboard, I see CPU of 2% and memory less than 20%.
With NCS still running, testing IOPS to the local RAID10 disks comes out to 215MB/sec and if I shutdown NCS service, it must be higher. So there are no bottlenecks anywhere, but web interface is slow. Towards the end of the post, someone talks about missing indexes, not sure what needs to be done to a brand new one with default DB tables and no new device added / discovered. You are not allowed to view links. Register or Login Thanks 74
Other / Re: Stopping unneeded PNP / APIC-EM Services on Prime Infra 3.4« Last post by dpsharma on July 08, 2018, 10:38:51 AM »So far, I have done following and let us hope this will get rid of these unwanted alarms:
1. Administration / Dashboards / Job Dashboard. Go under System Jobs, APIC-EM Integration, selected the APIC-EM Site sync, and then clicked on pause series to suspend the schedule. Did a application service NCS stop and start and this service remains suspended. 2. At the same place, under system Jobs, Infrastructure, selected last service of Post PNP image upgrade and paused / suspended the service. 3. Administration / System settings / Network and Devices, Unified AP reachability and chose to disable it. Need to wait to see if any more services fire up alarms. Thanks 75
Other / Re: Stopping unneeded PNP / APIC-EM Services on Prime Infra 3.4« Last post by dpsharma on July 08, 2018, 09:52:14 AM »76
Other / Re: Stopping unneeded PNP / APIC-EM Services on Prime Infra 3.4« Last post by dpsharma on July 08, 2018, 07:45:35 AM »I have attached a screenshot of the these services failure alarm. Need advise as to how to suppress these permanently, until needed.
Thanks 77
Other / Stopping unneeded PNP / APIC-EM Services on Prime Infra 3.4« Last post by dpsharma on July 07, 2018, 07:33:15 PM »Hello,
On a new out of the box Prime UC appliance, running latest 3.4, nothing configured other than initial wizard for networking portion of it, I get two major alarms complaining of Wireless PNP services for Mobility Express and APIC-EM failing to start at scheduled time. There is no need for these services in the environment that we are going to install it. It only has existing network switches to monitor, do configuration management / backups and deploy some CLI templates for common changes (like change password every so often) and firmware updates. What can be done to stop these and many other unwanted wireless related services, and to not be alerted for such major alarms. Thanks 78
Wireless / Cisco WLC Guest Wireess Splash Page on Andriod Devices« Last post by mfahadsid on July 06, 2018, 10:28:40 AM »Hi,
We are having issues with our Guest Wireless Splash page on some Android devices, our WLC is set to redirect devices on http://1.1.1.1, Multiple blogs suggested to change the Virtual IP Address from 1.1.1.1 as this is acquired by cloud flare dns. Question is does changing Virtual Interface IP Address requires a reboot of controller? 79
Wireless / Radius/Local EAP Authentication in Single SSID« Last post by sadiqhuss on July 06, 2018, 12:28:44 AM »Dear Colleague
I am trying to setup local EAP authetication and Radius in one SSID. My setup is as follow i want office staff to authneticate through windows NPS/AD using EAP configuresd on NPS (Radius). Also i want guest user to authenticated through local net user on WLC. I have cisco WLC 5508 running 7.6. I configured local EAP WLC with PEAP profile. I also configured SSID with AAA pointing to the NPS server and on Local EAP i choose the EAP profile. The problem is both authentication cannot work together. Only staff can successful authenticate but local net user cannot as it trys to authenticate through radius. But when i disable radius AAA server it autenticate through local net users. Please assist . Thanks Regards Sadiq 80
Security / Cisco and Microsoft PKI« Last post by Exonix on June 28, 2018, 07:00:05 AM »Hi,
I'm trying to implement a S2S VPN IKEv2 between Cisco ASA 5510 and ISR 886VA. This VPN will use the certificates which are issued by Microsoft CA 2012 R2. I found a very You are not allowed to view links. Register or Login how to configure NDES enrollment with Microsoft CA 2008 R2, but it seems doesn't work with 2012 R2. I have stopped on the step "checking the certificate" (5:30). I don't receive requested certificate. Moreover I don't see any requests on Microsoft CA. Although I got the root certificate. Could you please help me? Thank you in advance! #crypto pki enroll DC1-Domain-CA do sh cry pki cert do sh ver |