|
|
Pages: 1 ... 5 6 [7] 8 9 10
61
« Last post by nareh84 on February 13, 2019, 03:48:43 PM »
hi,
I want to deploy and practice SDWAN viptela in my home lab using vedge cloud vm. i want to know when we install vManage, does it by default comes with particular number of vedge cloud vm demo license or not. Also is there a way to get demo license. i tried to contact Cisco AM but he told that demo license is not available and we have to get NFR.
Regards
Nareh
62
« Last post by TFashy on February 04, 2019, 10:16:44 PM »
Thanks for posting this on my behalf.
Is there a place for initial lab configurations?
Because if I understand you correctly, since all that was initially configured on BC2 was default routing, SNMP and local username/password we need to configure the same (all three) on other fabric members to be discovered and provisioned? And that includes pair border and edge switches.
63
When you use LAN automation to bring up the fabric underlay, all switches should be treated the same way. Only once the fabric underlay is up and all devices are added to DNAC, you then start provisioning fabric overlay and assign device role. The DHCP server device uses for initial communication is configured on the seed switch by DNAC so there is no need for external DHCP server. This is demonstrated in RS0118 video.
64
I am trying to bring up fabric using a single seed border switch and CDP, what do I need configured on the second border switch and edge switches? 2nd is, do I need and exter DHCP server for discovery? Issue is I only see the seed switch.
65
« Last post by MC on September 04, 2018, 08:20:52 PM »
You can use Frame-IP-Address RADIUS attribute to assign IP to user. That can be statically assigned or fetched from another database like AD.
66
« Last post by moritezaa on August 20, 2018, 06:17:03 AM »
Hi everyone
how we can force client to use your assigned ip address on ISE 2.2?
67
« Last post by MC on July 16, 2018, 08:26:05 PM »
Thanks for all the follow up solution. Keep in mind that all alarm notification can be turned off as well under the settings but it might be better to silent the source like you did.
68
« Last post by MC on July 16, 2018, 08:23:09 PM »
That seems to be how it supposes to work. You can't have them work concurrently. See below excerpt from WLC config guide.
"Note: If any RADIUS servers are configured on the controller, the controller tries to authenticate the wireless clients using the RADIUS servers first. Local EAP is attempted only if no RADIUS servers are found, either because the RADIUS servers timed out or no RADIUS servers were configured."
69
« Last post by MC on July 16, 2018, 08:18:21 PM »
There should be no reason why 1.1.1.1 would stop working now that it has become a valid IP unless certain device is programmed to reject it although it is true that you should no longer use it. A safer alternative is a reserved IP like 192.0.2.1. I do not recall changing the IP requires a reboot but I think updating the certificate does. You should look into using name URL instead of IP also.
70
« Last post by MC on July 16, 2018, 06:16:21 PM »
If you check the CA, do you see any pending certificate. Can you even request certificate manually vis the /certsrv page? Two most common issues with SCEP is usually not having automatic approval enabled and not having security challenge disabled on the CA, which of which I believe controlled via registry
Pages: 1 ... 5 6 [7] 8 9 10
|
Recent Posts