User Info

Welcome, Guest. Please login or register.
Did you miss your activation email?

Recent Posts

Pages: [1] 2 3 ... 10
Security / Re: Firepower with PBR
« Last post by Visenteng on January 21, 2019, 01:47:40 AM »
Your site has been recognized as a publisher as well, we have to go get more knowledge is quite good.
Wireless / Re: Network flow with mobility anchor and ISE
« Last post by Visenteng on January 21, 2019, 01:46:54 AM »
Does your website make out seamlessly and requires no customization anything more.
Security / Re: ISE: per user static ip address
« Last post by MC on September 04, 2018, 08:20:52 PM »
You can use Frame-IP-Address RADIUS attribute to assign IP to user. That can be statically assigned or fetched from another database like AD.
Security / Re: ISE: per user static ip address
« Last post by moritezaa on August 20, 2018, 06:17:03 AM »
Hi everyone
how we can force client to use your assigned ip address on ISE 2.2?
Other / Re: Stopping unneeded PNP / APIC-EM Services on Prime Infra 3.4
« Last post by MC on July 16, 2018, 08:26:05 PM »
Thanks for all the follow up solution. Keep in mind that all alarm notification can be turned off as well under the settings but it might be better to silent the source like you did.
Wireless / Re: Radius/Local EAP Authentication in Single SSID
« Last post by MC on July 16, 2018, 08:23:09 PM »
That seems to be how it supposes to work. You can't have them work concurrently. See below excerpt from WLC config guide.

"Note: If any RADIUS servers are configured on the controller, the controller tries to authenticate the wireless clients using the RADIUS servers first. Local EAP is attempted only if no RADIUS servers are found, either because the RADIUS servers timed out or no RADIUS servers were configured."
Wireless / Re: Cisco WLC Guest Wireess Splash Page on Andriod Devices
« Last post by MC on July 16, 2018, 08:18:21 PM »
There should be no reason why would stop working now that it has become a valid IP unless certain device is programmed to reject it although it is true that you should no longer use it. A safer alternative is a reserved IP like I do not recall changing the IP requires a reboot but I think updating the certificate does. You should look into using name URL instead of IP also.
Security / Re: Cisco and Microsoft PKI
« Last post by MC on July 16, 2018, 06:16:21 PM »
If you check the CA, do you see any pending certificate. Can you even request  certificate manually vis the /certsrv page? Two most common issues with SCEP is usually not having automatic approval enabled and not having security challenge disabled on the CA, which of which I believe controlled via registry
Security / Re: Avaya 802.1x Deployment
« Last post by MC on July 16, 2018, 06:12:14 PM »
I personally have not. When you do .1x on a hardware like that, you are at the mercy of the manufacture. Have you look into MAB or does it not meet your security requirement?
General Discussion / Re: Can't find lab docs...
« Last post by Administrator on July 16, 2018, 06:09:41 PM »
Hi.. All lab diagrams are posted on corresponding video page. You will need to login to see them.
Pages: [1] 2 3 ... 10
SimplePortal 2.3.5 © 2008-2012, SimplePortal